Amano Readers and Credentials

Change Modulation mode on XQT904 Quad Transmitter
When using the XQT904 transmitter with an Amano UHF Receiver (HRR900), you need to make sure the trasmitters are set to FSK mode.  Follow the procedure belo...
Sun, Mar 10, 2019 at 7:42 PM
How do I change Wiegand Output Mode on Amano readers?
Let's start by saying that the default Mode 2 option on the reader is typically going to work on most installations.  If you are using any Amano credent...
Wed, May 22, 2019 at 4:26 PM
Setting Read Range on a Conekt Reader
This document explains how to set the read range on a Conekt Reader  Applies to: CSR-35  Toggle between CSR-35P (presentation) and CSR-35L (long range)...
Fri, Oct 23, 2020 at 8:57 AM