If OMNIA is running as a service, you must stop the OMNIA Server Service.

If OMNIA is not running as a Service, Skip this step

After the OMNIA Service is stopped, Launch OMINA Server App.

C:\OMNIA\Bin\OMNIA.exe

ONCE the OMNIA Server App has been started, Find the OMNIA Icon in the Systray.

Right Click the OMNIA Icon and Select Settings

The ‘Settings’ panel will open. Set the two values to the desired no motion timeout in the fields indicated with the red arrows below. 

Please note, these times are in milliseconds. The default is 4 hours, therefore: 

4 (hours) x 60 (minutes) x 60 (seconds) x 1000 (milliseconds) = 14400000

Once changed, close the ‘Settings’ panel (the values are autosaved). 

If OMNIA was running as a Service, Complete the Next Steps

Exit from the Omnia Application. 

In Services, restart the Omnia Service.