Emergency Mode On The Dashboard



Add a command widget to the dashboard.





  • Choosing site will activate Emergency mode across all controllers
  • Choosing Controller will activate Emergency mode only on the selected controller
  • Choosing Reader will activate Emergency mode only on the selected reader.




  • Click Save

  • The widget will display as shown below




You will need to Edit the Behavior of the Emergency Mode in the Reader Profiles.


  • Go to Setup/Reader Profiles


  • Select the Reader Profile that will be affected by the Emergency Mode



  • Choose Behavior



  • Select Edit Behavior


  • Scroll down to Emergency



  • select output states

  • Select to either Drive or Not Drive Relay depending to lock type/lock action.

  • Select Save


Toggle Emergency mode from the Portal Dashboard.