Site wants a lockdown button installed
To Create an input that will lockdown the Site proceed as follows;
You will need to create an Action in the Controller Profiles, this action will affect all Terminals
Go to Setup/Controller Profiles
Go to Actions, then Add Action
Describe the Action and Choose Lockdown Mode for the Type. Click the Enabled Radio Button, Do Not Choose a Time Pattern.
Now Create an Input in the Reader Profile where the Lockdown Input is wired to. Either Input 1 or Input 2 depending on where the wires land
Go to Setup/Reader Profiles/
Once in the Reader Profile, select the Inputs tab, create new input
Name the Input Accordingly, choose Lockdown as the Type
Make sure you are choosing the correct input, then save
Your input button will now Trigger a Lockdown when pressed.