Auto-ID is a process that polls Controllers to identify their type and their Logical Address. Similarly, other units such as Terminals are also polled and identified. Newly connected units are assigned Logical Addresses.


Before beginning, ensure all terminals are powered up, dip switches are set, and IP addresses are configured

Ensure the Engine is stopped.  Open Discovery Utility (C:\AmanoNet\bin\NetDiscovery.exe)


Grouping

The purpose of the group name is for grouping Controllers with their dependent IP Terminals.


On display of the Controllers and Terminals, the following icons appear: the icon represents non-linked Controllers. The icon represents Terminals and the icon represents Controllers with linked Terminals. On expanding the Controller tree, the icon displays, with the linked Terminals displaying below.  Group Controllers and Terminals as follows:

Creating a Group for a Controller and its Terminals


NOTE: It is unnecessary to give a group name to a Controller if it has no IP Terminals. 


  1. Select the Controller and the Terminals it should control.
  2. On the menu bar, go to Configuration>Add to Group.
  3. In the Enter Group Name dialog, enter a suitable group name.
  4. Logon if requested. (EC2/400i password is “impro”, password for all other hardware is “masterkey”)
  5. Click the button.


Adding Terminals to Existing Controller Groups 

  1. Select the Terminal(s) to be added to the Group.
  2. On the menu bar, go to Configuration>Add to Group.
  3. In the Select the Group Name dialog, double-click on your chosen group name row.
  4. Logon if requested
  5. Click the button.


Assign a Logical Address

A new Controller has the default Logical Address FF. To assign a new Logical Address:


  1.  In the Discovery Utility, select the Controllers  to be configured.
  2. On the menu bar, go to Configuration>Configure LA.
  3. Type the new hexadecimal Logical Address in the text field.
  4. Click the button to confirm.
  5. Repeat steps 3 and 4 for each selected Controller.


IMPORTANT: The same Logical Address should not be used more than once per Site. To prevent this, select all the Controllers and Terminals on a Site. Go to Configuration>Query LA. The Logical Addresses display in the LA column on the right-hand side of the table. Ensure that the Logical Address is not repeated. IF this is a new controller you will have a logical address of FF. This must also be changed to a new LA.

 

Export the Configuration File


Controller and Terminal configuration information is made available to AmanoNet Modules as follows:

 

  1. Select the Controller(s) to be added to the Site. Only necessary to select the Controller(s) as the grouped Terminal(s) automatically export with their grouped Controller.
  2. On the menu bar, go to File>Export IP Config.
  3. In the Save dialog, enter a file name.
  4. Click on the Save button.


Import the Discovery File


Import the Configuration File as follows:

  1. Open Engine (C:\AmanoNet\bin\Engine.exe)
  2. On the menu bar click Configuration>Import Devices.
  3. Type in the location of the Discovery Configuration File OR click to browse for the file (C:\AmanoNet\Discovery.txt)
  4. Click the button.
  5. Click Yes to confirm


Activate UDP Communications


Activate the UDP communication option in AmanoNet Engine as follows:

  1. On the menu bar, click Configuration>Engine Properties
  2. Tick the UDP comms option
  3. Click the button to confirm


Auto ID


  1. Start the Auto-ID process by clicking the Auto ID button.  
  2. After the Auto-ID is complete, click the start button in the Engine.


NOTE: You may have to refresh or restart Access to see your new hardware in the tree.