Factory Reset Nexus220 controller : Help Desk

How can we help you today?

Created by: Craig Forant

Modified on: Mon, Apr 27, 2020 at 5:42 AM

The following procedure will reset the unit to factory settings including the Default IP address 192.168.100.1 and subnet of 255.255.255.0.

Set switch number one on the Door Lock Select DIP-switch to the ON position.
Power cycle the Controller by removing and then reapplying all power sources.
After 60 seconds with the Controller running, set switch number one on the Door Lock Select DIP-switch back to the OFF position.

Craig is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk